WIRE POINTING MACHINE

Before the wire is pushed through the die hole of wire drawing machine, to enter the wire in the die it should be pointed at starting end, so that it can pass through the die hole easily. The pointed end of the wire is then pulled by means of pull-in tong in order to draw it.

Wire pointing machine is used to point starting end of wire. It has two rollers having different sizes of grooves on their periphery. As the machine starts, rollers rotate in opposite direction of each other. End of the wire to be pointed is pushed between the two rollers which tend to point the wire.

Rollers are made out of high quality alloy steel and are duly hardened and ground to give longer working life.

TECHNICAL SPEICIFICATION:

Power Requirement : 3 hp 
Floor Space mm : 360  x 510
Approx. Nett Weight kgs. : 319
Approx. Gross Weight kgs. : 450
Case Size cms. : 89 x 77 x 140